Temperature Control Equipment

• Temperature Control Equipment Product Classification
• Chiller(Circulating Fluid Temperature Controller)
• Bath
• Temperature Control System for Chemical Liquids
• Air Temperature Controller
• Related Products

• Application Examples

• Glossary of Terms
• Search from Initials
• Search from Category

●Magnet pump

This is a general term for pumps that use magnetic coupling for the sealing mechanism.
Using magnetism to couple the rotor on the inside of the pump chamber to the permanent magnet mounted on the motor shaft side, with the pump chamber wall between them, the rotation is conveyed to the rotor inside the pump chamber. Since the pump chamber can be completely separated, pump chamber can be completely sealed off, so there is absolutely no external leakage.
Since a large magnet coupling is needed, this type of pump is more difficult to make in small sizes than the mechanical seal type, and the cost is also higher.

●Mechanical seal pump

This is a general terms for pumps that use mechanical seals for the sealing mechanism.
The rotating seal mounted on the motor shaft side and the fixed seal mounted on the pump chamber side rotate, and their surfaces touch one another, sealing off the fluid. As a result, there is a slight, external leakage of fluid. The volume of leakage increases over time, so it is necessary to replace the seal portions regularly.
This type can be used for applications where the motor shaft and impeller are directly linked and there is high-shaft power.