-
WEB Catalog
Product Information »
WEB Catalog
IN_PROD_992
»
Arc Welding Process Equipment
IN_PROD_994
»
Specialty Cylinders
For High Precision Positioning Pin Shift Cylinder CKQG-X2370
・High Precision: Rod end deflection ±0.1 mm or less
・Position Reproducibility ・Pin for positioning the workpiece provided by the customer can be directly mounted. ・Built-in coil scraper ・Reduces labor time by integrating the cylinder and guide. ・Magnetic field resistant auto switches are mountable. |
|
Data Download
PDF
Other Data |
---|
Series | Flow characteristics 4/2→3/5(A/B→E) C[dm3/(s・bar)] |
Flow characteristics 4/2→3/5(A/B→E) b |
Applicable cylinder size |
---|---|---|---|
Built-in standard magnet type | CKQG-X2370 | 32, 40, 50 | 25, 30, 40, 50 |
For High Precision Positioning Pin Shift CylinderCKQG-X2370
Series | Flow characteristics 4/2→3/5(A/B→E) C[dm3/(s・bar)] |
Download |
---|---|---|
Built-in standard magnet type | CKQG-X2370 |
|
Offset Pin Shift Cylinder CDQ2B-X2839
・with high rigidity offset load capacity
・High rigidity, High precision ・With plate extended: Deflection of ±0.1 mm or less ・3 different port location directions can be selected. ・Can be mounted from 2 directions ・Coil scrapers equipped as standard ・Auto switches are mountable. |
|
Other Data |
---|
Series | Flow characteristics 4/2→3/5(A/B→E) C[dm3/(s・bar)] |
Flow characteristics 4/2→3/5(A/B→E) b |
Applicable cylinder size |
---|---|---|---|
Offset Pin Shift Cylinder | CDQ2B-X2839 | 32, 40, 50 | 25, 50, 75 |
Offset Pin Shift CylinderCDQ2B-X2839
Series | Flow characteristics 4/2→3/5(A/B→E) C[dm3/(s・bar)] |
Flow characteristics 4/2→3/5(A/B→E) b |
Download |
---|---|---|---|
Offset Pin Shift Cylinder | CDQ2B-X2839 | 32, 40, 50 |
|
Slim-line Power Clamp Cylinder CKZ2N-X2346
・The distance accuracy from the reference hole to the lower surface
of the clamp arm is ±0.1 mm. ・Easy setup with a scale The guide of the appropriate position can be checked visually when adjusting the shim. ・Reduced width Easy torch entry for spot welding, arc welding, etc. |
|
Other Data |
---|
Series | Flow characteristics 4/2→3/5(A/B→E) C[dm3/(s・bar)] |
Flow characteristics 4/2→3/5(A/B→E) b |
---|---|---|
CKZ2N-X2346 | 30º, 45º, 60º, 75º, 90º 105º, 120º, 135º |
50, 63, 80 |
Slim-line Power Clamp CylinderCKZ2N-X2346
Series | Flow characteristics 4/2→3/5(A/B→E) b |
Download |
---|---|---|
CKZ2N-X2346 | 50, 63, 80 |
|
Frame Clamp Cylinder WRF100
・High output: 20,000 N (at 0.5 MPa)
|
|
Other Data |
---|
Series | Flow characteristics 4/2→3/5(A/B→E) C[dm3/(s・bar)] |
Flow characteristics 4/2→3/5(A/B→E) b |
---|---|---|
WRF100 | 100 | 48 |
Frame Clamp CylinderWRF100
Series | Flow characteristics 4/2→3/5(A/B→E) C[dm3/(s・bar)] |
Download |
---|---|---|
WRF100 | 100 |
|
Compact Clamp Unit CDQ2
・Space saving
Used to clamp the workpiece, and open or close the spatter cover of the workpiece. ・Labor reduction Reduces design and assembly labor by integrating the cylinder and clamping mechanism. ・Clamp unit used in common Both ø20 and ø32 clamp cylinders use the same clamp unit and only the clamp unit can be replaced. This contributes to reduction of spare parts. ・Possible to clamp in both directions Capable of clamping in both directions with an arm opening/closing angle of 90° or more |
|
Data Download
PDF
Other Data |
---|
Series | Flow characteristics 4/2→3/5(A/B→E) C[dm3/(s・bar)] |
Flow characteristics 4/2→3/5(A/B→E) b |
---|---|---|
CDQ2B20-DCQ5414Q | 20 | 96° |
CDQ2B32-DCR0859R | 32 | 96° |
Compact Clamp UnitCDQ2
Series | Download |
---|---|
CDQ2B20-DCQ5414Q |
|
CDQ2B32-DCR0859R |
|
Center Lock Unit MA331-X441
・Locating pin workpiece contact portion can switch from
center lock (for locating) to free (for releasing workpiece) ・Even when the workpiece is distorted after welding, if the locating pin is set to free, the workpiece can be removed easily from the locating pin. ・Locating pin swing angle and rotation angle 3° ±1° |
|
Data Download
PDF
Other Data |
---|
Series | Flow characteristics 4/2→3/5(A/B→E) C[dm3/(s・bar)] |
Flow characteristics 4/2→3/5(A/B→E) b |
---|---|---|
MA331-X441 | Double acting | 0.2 to 0.7 MPa |
Center Lock UnitMA331-X441
Series | Flow characteristics 4/2→3/5(A/B→E) C[dm3/(s・bar)] |
Download |
---|---|---|
MA331-X441 | Double acting |
|
Magnet Gripper MHM-X6400
・Steel plates can be transferred without a vacuum.
Can support workpieces with holes and uneven surfaces when a vacuum pad cannot be used ・Holds workpieces even when the air is shut off ・High holding force: 80 N (Workpiece plate thickness: 0.6 mm), 120 N (Workpiece plate thickness: 1.4 mm) ・Residual holding force: 0.3 N or less (Reduces workpiece release time) |
|
Other Data |
---|
Series | Flow characteristics 4/2→3/5(A/B→E) C[dm3/(s・bar)] |
---|---|
MHM-32D1-X6400 | 80N |
MHM-32D2-X6400 | 50N |
MHM-32D3-X6400 | 30N |
Magnet GripperMHM-X6400
Series | Download |
---|---|
MHM-32D1-X6400 |
|
MHM-32D2-X6400 |
|
MHM-32D3-X6400 |
|